Maintenance of bomba the aperture: 5 things that can damage your bomb
We know that the diaphragm pump is resistant, reliable, versatile and easy to maintain, being one of the best options for fluid transport. Because they have a simple design, they are very economical and can be operated quite easily, ensuring superior performance.
However, as efficient as they are, the diaphragm pumps They may also have problems, and should be used properly to prevent this type of unforeseen event. In addition to increasing the life of your pump, this also ensures that it can operate in its entirety and deliver the expected performance.
To help you, we have separated the top five errors that can cause problems with your diaphragm pump, see below:
- Do not use components that are resistant to abrasion
The type of fluid that will be pumped should be considered when choosing the components that will be used in your diaphragm pump. Thus, when it is pumping abrasive fluids, choose components that are resistant to this abrasion. For example:
For plastic pumps, the most resistant material is PVDF, and in the case of abrasive ceramic fluid pumping, stainless steel valves or cast iron are better options.
In any case, see the compatibility table provided by the manufacturer to ensure proper functioning and avoid excessive wear of the components.
- Chemically incompatible pumping product
Like abrasive fluids, chemically incompatible with pump composition can also cause damage. And this includes, in addition to the pump itself, elastomers, cast parts and other components, increasing wear and reducing equipment life.
Thus, it is very important to select a pump that is made of compatibility with the fluid you will pump by consulting the chemical compatibility guide on your pump. If you still have questions, contact the manufacturer and get the necessary guidelines.
- Do not take into account the compressed air supply
Because they are the main energy sources used in the operation of the bomba, the pressure and air quality are the aspects that most affect the life of the diaphragm pump. Just as impure air can affect pump performance, using incorrect pressure can also have a major impact on its operation.
Since compressed air pressure will determine pump operation speed, errors in this configuration can greatly impair equipment performance. If it is operating with more pressure than necessary, the pump can work faster and deliver an inefficient result, in addition to increasing wear and cause damage.
With an air filter/regulator, it is possible not only to maintain air quality, but also ensure that the pump pressure is adequate. With this, the filter has enough time to enter and leave, allowing the valves to fit correctly and complete the correct pumping course.
- Improper sizing of connections
Fluid input and output tubes and connections should be proportional to the size of the pump connection. Ensuring that they are compatible can increase the efficiency of your pump. For example: if you are using a bomba 2 ”, pipes must be the same size.
When they are smaller than the pump, suction happens restrictedly, with a lower flow to expected. In addition, the diaphragm will also suffer a greater damage.
- Lack of training
Even if pneumatic diaphragm pumps Be quite simple, it is very important that operators are prepared to use them, knowing their components and the technology used. For this, it is important that:
- Read the manuals provided by the manufacturer;
- Keep in touch with the bomb manufacturer to clarify your doubts and be able to operate the pump correctly.
We hope this content has helped you know the main errors in using your pneumatic diaphragm pump to extract the best performance and functionality. Also check out our other materials on the subject and learn even more about the bombs!
Always count on the duplation, your reliable supplier for pneumatic pumps. Contact us at (48) 3438-8484 or email vendas@duplacao.com.br And talk to our experts.
