Triple diaphragm pump of 1 in. air -operated
The Husky 1050HP has a 25.4 mm connection (1 in.) And is available in aluminum and stainless steel. Alternate between low or high pressure operating modes through the low-high pressure mode valve.
The Husky 1050HP is the first bomba on the market that allows users to choose between high or low pressure modes of operation through Graco's low-high pressure mode valve. High pressure operation is not always necessary, so switch to low pressure mode to reduce air consumption by up to 50%. These features, combined with the quality and reliability of our Husky standard diaphragm pump design, make this pump the only high pressure diaphragm pump on the market.
The Husky 1050HP is the first market diaphragm pneumatic pump to allow users to choose from high or low pressure operating modes through the graco-high pressure mode valve. High pressure operation is not always required, so alternate to low pressure mode to reduce air consumption by up to 50%. These features, combined with the quality and reliability of the Husky standard diaphragm pump design, make this pump the only high -pressure diaphragm pump on the market.
Husky 1050HP - Advantages of double diaphragm pumps
- Increases fluid pressure without impairing the flow
- The low pressure mode valve allows you to operate the pump as a common air operated diaphragm pump or as a high pressure air operated diaphragm pump
- Reduces air consumption by up to 50% in low pressure mode
- Same parts of husky 1050 diaphragm pump replacement pieces
| Overview | |
| Maximum fluid flow in high pressure mode |
50 gpm (189 L/min)
|
| Maximum fluid output pressure |
125 psi (17,2 bar, 1,72 MPa)
|
| Maximum size of pumping solids |
1/8 pol. (3,2 mm)
|
| Cycle fluid displacement |
0, 2 g (0.76 liters)
|
Husky 1050HP - Performance
