Produced in numerous units, these valves were very well received by customers. In fact, the internal system proven, spool shutter, the use of special mixtures to the joints, the advanced technology that allows the body of the valve in light material (plastic), allow durability, rapid switches, high flow rates even without lubrication at reduced costs. Where not required by standards, this series of valves can be used conveniently for the base assembly. In addition, the inversion of command and return positions and the need to use the screw for the drainage hole is not used where the amplified command piston is not used.
Models
Simple/double pneumatic impulse
AI-1009 / AE-1120 / AE-1010 / Yes-1121
Simple/double electric impulse
- Simple: Yes-1000 / yes-1100
- Double: Yes-1010 / a-21
Character
Maximum pressure: 10 bar ;
Room temperature: -10°C ÷ + 50°C ;
Fluent: Filtered air 50µm dehumidified or not;
Permutation system: Mixed;
Connections: ISO 5599/1 Interface (Base Base Base Plates);
Nominal diameter (mm): 8 (T1); 10 (T2);
Nominal flow level (NL/min): 1480 (t1); 2300 (T2);
Valve body: Acetallic resin;
Seals: NBR and Polyurethane;
Voltage: 12-24 VCC / 24-110-230 VCA ;
Energy consumption: 2,5W (DC) – 5VA(AC) ;
Pilot/coil electro: AA-U1;
Connector: AM-5110
