The great difference of CL/CM valves is the wide range of devices for actuation and return, whether mechanical, manual, electrical or pneumatic; Which makes the suitability of such a product moldable according to your needs. The valve consists of two parts: body and gate (in a single piece) which in its cavities has a system of floating seals with self-compensation for wear, caused by a special mixture. All this, in addition to a large flow rate, the absence of communication between the chambers during the switching period (positive coverage), allows working without lubrication, simplified maintenance, allows a notable number of maneuvers. Other typical applications of the spool system, use in vacuum, can be used for open or closed 5/3 center valves.
Models
Depending on the application, specify the valve according to the catalogue.
Character
Maximum pressure: 10 bar;
Room temperature: -10°C ÷ + 45°C ;
Fluent: Filtered air 50µm dehumidified or not;
Permutation system: SPOOL;
Connections: G1/8 and G1/4 pole;
Nominal Diameter: 6,5mm (G1/8) e 8,5mm (G1/4);
Nominal flow level (NL/min): 890 (G1/8) e 1480 (G1/4);
Valve body: G1/8 – Cast Zamak and G1/4 – Aluminum;
Seals: NBR;
Voltage: 12-24 VCC / 24-110-230 VCA ;
Energy consumption: 2W ;
Pilot/coil electro: Series AA/ U1-U3 ;
Connector: AM-5110;
