Heavy Duty Drum Agitators
Agitator set for open tanks and drums
Stainless steel stirrer and lid for corrosion resistance and compatibility with water-based materials
Agitator set for open tanks and drums. Ideal for high viscosity materials.
Character
Leak-free, oil-free gearbox prevents material contamination
The two paddles thoroughly mix the finishing materials
The siphon option allows the material to pass through the agitator shaft
The lift allows you to easily and safely lift the agitator in and out of the paint drum, which reduces the risk of injury and spillage
Can take samples and review material during operation using the access door
Specifications
| Drum Agitator | |
| Maximum Air Input Pressure |
7 bar
|
| Motor Power Rating at 1200 rpm (shaft at 50 rpm), using 12 cfm/0.34 cu m/min |
186 W
|
| Maximum recommended shaft rmp |
100
|
| Gear Reducer Ratio |
24:1
|
| Weight |
11.7 kg
|
| Span of agitator blades |
508 mm
|
| Width of agitator blades |
76 mm
|
| Air Inlet |
Mates with 1/4 in npt(f) quick-disconnect, Part No. 208536
|
| Wetted Parts |
304 SST, 304/304L SST, acetal, A/F, nylon, PTFE
|
| Maximum flow at 100 cps |
45.5 lpm
|
| Maximum flow at 1000 cps |
4.5 lpm
|
| Air Consumption |
0.08 to 0.85 cu m/min
|
| Height | |
| From top of air motor to end of agitator shaft (no nut) |
965 mm
|
| From top of air motor to end of siphon tube (no fittings) |
1092 mm
|
| Sound Data | |
| Sound Power (Typical operating conditions (50 rpm (shaft) agitating 300 cps water-base material)) |
77.3 dB(A) measured per ISO 3744–1981
|
| Sound Power (Maximum noise conditions (100 rpm (shaft) agitating an empty container)) |
86.4 dB(A) measured per ISO 3744–1981
|
| Sound Pressure (Typical operating conditions (50 rpm (shaft) agitating 300 cps water-base material)) |
63.8 dB(A) measured per ISO 3744–1981
|
| Sound Pressure (Maximum noise conditions (100 rpm (shaft) agitating an empty container)) |
72.9 dB(A) measured per ISO 3744–1981
|
